Oil nozzles (3S-GTE)¶

Components¶

Removal of oil nozzles¶

1. Remove crankshaft. (See Cylinder block (3S-GTE) › Removal of engine)

2. Remove oil nozzles (with relief valves).

   Using a 5 mm hexagon wrench, remove the bolt and oil nozzle. Remove the four oil nozzles.

   

Inspection of oil nozzles¶

Inspect relief valves (oil nozzles)

Push the valve with a wooden stick to check if it is stuck.

If stuck, replace the relief valve.

Installation of oil nozzles¶

1. Install oil nozzles (with relief valves).

   Using a 5 mm hexagon wrench, install the oil nozzle with the bolt. Install the four oil nozzles.

   Torque: 93 kg-cm (81 in.-lb, 9.1 N·m)

   

2. Install crankshaft. (See Cylinder block (3S-GTE) › Assembly of cylinder block)